Gold Cura
Gold Cura HD-7H Non-LED Scaler Handpiece – Satelec-Type & DTE Compatible
Low stock
Couldn't load pickup availability
HD-7H Non-LED Satelec-Type Scaler Handpiece
Gold Cura HD-7H Non-LED Scaler Handpiece is a detachable piezo ultrasonic scaler handpiece intended as a compatible replacement or spare for selected Satelec-type and DTE non-LED scaler systems.
This is a non-LED, non-optic, no-light model associated with the Satelec/DTE connection and tip family. Always match the scaler model, hose connector and illumination requirement before ordering.
Key Features
- Model: HD-7H
- Illumination: Non-LED / no light
- Connection family: Satelec/DTE-type fitting
- Typical compatibility: Selected DTE and Satelec-type non-LED scaler units
- Tip family: Compatible Satelec-type or DTE-type tips approved for the unit
- Design: Detachable piezo ultrasonic handpiece
- Sterilization: Autoclavable up to 135°C according to the supplied reprocessing instructions
- Use: Professional dental use by trained practitioners
Important Satelec and Acteon Compatibility Notice
Acteon compatibility is not universal. Satelec is associated with the Acteon group, but Acteon and Newtron units use model-specific connectors. Use HD-7H only when the exact non-LED Satelec-type fitting matches.
The HD-7H is not automatically interchangeable with HW-3H, HW-5L or HD-7L. Compare the current handpiece base and hose connector with the product photographs. Some Acteon/Newtron systems require different SLIM or B.LED handpieces.
Common Compatible Configurations
HD-7H handpieces are commonly associated with selected non-LED DTE configurations within families such as V2, D2, V3, D3, D5, D6 and D7 and with selected systems using a matching Satelec-type connection. Production versions can differ, so verify the exact equipment manual and connector.
Not Suitable For
- LED or optic HD-7L connections
- EMS-type HW-3H or HW-5L connections
- Acteon/Newtron units requiring a different SLIM or B.LED connector
- Magnetostrictive ultrasonic scaler systems
Product Specifications
| Specification | Details |
|---|---|
| Product | Detachable ultrasonic scaler handpiece |
| Brand | Gold Cura |
| Model | HD-7H |
| Light | Non-LED / no light |
| Technology | Piezo ultrasonic |
| Connection | Satelec/DTE-type fitting |
| Tip family | Satelec/DTE-style |
| Acteon compatibility | Selected matching Acteon-Satelec systems only; not universal |
| Design | Detachable |
| Sterilization | Autoclavable up to 135°C as instructed |
Compare All Four Gold Cura Scaler Handpieces
| Model | Light | Connection and Tip Family | Typical Compatible System | Choose This Model When |
|---|---|---|---|---|
| HW-3H | Non-LED | EMS-type 3-hole; EMS-style tips | Selected Woodpecker UDS and EMS-type non-LED units | You need a non-light EMS-type handpiece |
| HW-5L | LED | EMS-type LED/optic; EMS-style tips | Selected Woodpecker UDS LED and EMS-type LED units | You need illumination with an EMS-type LED connection |
| HD-7H | Non-LED | Satelec/DTE-type; Satelec/DTE-style tips | Selected DTE and Satelec-type non-LED units | You need a non-light Satelec/DTE-type handpiece |
| HD-7L | LED | Satelec/DTE-type LED; Satelec/DTE-style tips | Selected DTE LED and Satelec-type LED units | You need illumination with a Satelec/DTE-type LED connection |
Important: HD-7H and HW-3H are both non-LED but use different connector families. HD-7L and HW-5L are both LED but are also not automatically interchangeable.
How to Confirm Compatibility
- Confirm that the existing handpiece is non-LED.
- Check the scaler model and equipment manual.
- Inspect the hose connector and verify a Satelec/DTE-type fitting.
- Confirm the Satelec/DTE-style tip family.
- For Acteon/Newtron equipment, verify that the unit does not require a different SLIM or B.LED handpiece.
- Send Gold Cura connector photographs when uncertain.
Directions for Use and Care
- Switch off the scaler before connecting or removing the handpiece.
- Inspect the connector, O-rings, hose, handpiece body and scaler tip.
- Align the matching connector and attach without forcing it.
- Install an approved Satelec/DTE-compatible tip using the correct torque wrench.
- Confirm adequate water flow before treatment.
- After use, remove the tip and handpiece according to the equipment instructions.
- Clean, inspect, package and sterilize according to the supplied reprocessing instructions.
- Allow the handpiece to cool and dry fully before storage or reconnection.
Stop use if the handpiece is cracked, leaking, unusually hot, producing irregular vibration or unable to maintain water flow.
Frequently Asked Questions
Is the HD-7H an LED scaler handpiece?
No. HD-7H is a non-LED, no-light model.
How is HD-7H different from HW-3H?
Both are non-LED. HD-7H uses the Satelec/DTE-type family, while HW-3H uses the EMS-type family.
How is HD-7H different from HW-5L?
HD-7H is a non-LED Satelec/DTE-type model. HW-5L is an LED EMS-type model.
How is HD-7H different from HD-7L?
Both belong to the Satelec/DTE-type family. HD-7H is non-LED, while HD-7L is LED/optic. Their connectors and electrical contacts may differ.
Is HD-7H compatible with all Acteon scalers?
No. It may fit selected Acteon-Satelec systems only when the exact non-LED connector matches. Compatibility is not universal.
Which scaler tips should be used?
Use only Satelec-type or DTE-type tips approved for the scaler and handpiece.
Is it detachable and autoclavable?
Yes. It is detachable and can be autoclaved up to 135°C when processed according to the supplied instructions.
Is this an original Satelec, Acteon or DTE handpiece?
No. It is a Gold Cura compatible replacement. Brand references identify the connection family and do not imply manufacture or endorsement.
Browse related products: Scaler Handpieces.
