Gold Cura Chamfer Diamond Burs FG – CF-11 & CF-26, Pack of 5

Direct answer: Gold Cura Chamfer Diamond Burs FG are friction-grip dental diamond burs used to create, shape and refine chamfer-style crown finish lines. Choose CF-11 for a slimmer, longer and more conservative chamfer profile, or CF-26 for a shorter, wider and more robust chamfer profile. Each selected code is supplied as a pack of 5 identical burs.

Chamfer Diamond Burs FG: Key Facts

What Is a Chamfer Diamond Bur?

A chamfer diamond bur has a rounded or torpedo-like working end designed to produce a curved transition between the prepared axial wall and the finish line. Chamfer margins are commonly selected when the restorative plan requires a defined, rounded cervical finish line rather than a flat shoulder.

The final margin width depends on the bur profile, cutting depth, angulation and clinical technique. Select the bur according to tooth anatomy, restoration design, restorative material requirements and the clinician’s preparation plan.

When to Use CF-11 vs CF-26

The two codes serve different clinical access and reduction requirements. The guidance below describes their relative profiles. Exact working dimensions can vary between manufacturers, so confirm the Gold Cura product image, packaging and supplied specification before clinical use.

Simple selection rule: use CF-11 when access is narrower and the preparation should remain conservative; use CF-26 when the tooth and restorative plan require a broader, more substantial chamfer. Always use the smallest profile that safely creates the intended finish line.

CF-11 and CF-26 Comparison

Common CF catalogues associate CF-11 with a slim rounded-taper profile and CF-26 with a wider torpedo/modified-chamfer profile. Do not rely on another manufacturer’s measurements as the Gold Cura specification; verify the supplied product information.

Common Clinical Applications

• Creating a chamfer finish line during crown preparation
• Axial and cervical reduction for suitable crown and bridge preparations
• Refining an existing rounded crown margin
• Developing a smooth transition between the axial wall and cervical finish line
• Selected full-metal and metal-ceramic crown preparations
• Selected ceramic or zirconia preparations when a chamfer or deep-chamfer design is approved by the restorative system and clinician
• Finishing transitions for suitable onlay and indirect-restoration preparations

How to Choose the Correct Chamfer Bur

1. Confirm the finish-line design. Use a chamfer bur only when a rounded chamfer margin is appropriate for the planned restoration.
2. Assess available access. Select CF-11 for narrower access and CF-26 for broader accessible surfaces.
3. Choose the required reduction. Use the slimmer CF-11 for conservative preparation and the wider CF-26 where a more substantial chamfer is clinically required.
4. Consider the tooth. CF-11 is generally easier to control on smaller teeth and narrow axial walls; CF-26 is generally better suited to larger posterior surfaces.
5. Confirm grit separately. The CF code identifies the profile, not necessarily the abrasive grade. Verify the colour band or supplied product specification.
6. Check the handpiece. These are FG burs and require a compatible high-speed friction-grip handpiece.
7. Inspect before use. Do not use a bur that is bent, damaged, corroded, worn or does not seat securely.

Chamfer vs Other Crown-Preparation Bur Shapes

Preparation and Finishing Sequence

Bur shape and grit are separate choices. A coarser bur may be selected for initial reduction, followed by an identically or suitably shaped fine bur for margin refinement and surface finishing. Do not assume the grit from the CF code alone.

• For heavier initial reduction, view Green Coarse-Cutting Diamond Burs.
• For margin and surface refinement, view Fine Diamond Burs FG.
• For the complete category, view Dental Burs & Bur Kits.

Professional Use and Handling

• For use by trained dental professionals.
• Use with a compatible and well-maintained FG high-speed handpiece.
• Confirm that the bur is fully seated and securely retained before activation.
• Use appropriate water cooling, speed, pressure and intermittent cutting technique according to the clinical procedure and supplied instructions.
• Avoid excessive pressure or prolonged stationary contact, which can generate heat and alter the intended preparation.
• Follow the cleaning, disinfection, sterilisation, reuse and replacement instructions supplied with the product.
• Replace any bur that is damaged, bent, corroded, visibly worn or no longer cuts efficiently.

Frequently Asked Questions

What are chamfer diamond burs used for?

They are used to create and refine rounded chamfer finish lines during suitable crown, bridge and indirect-restoration preparations.

What does CF mean in dental burs?

CF identifies the chamfer-bur family or profile. The number distinguishes the particular working shape and relative size.

What is the difference between CF-11 and CF-26?

CF-11 is the slimmer, longer and more conservative option. CF-26 is the shorter, wider and more robust option for broader chamfer preparation.

When should I use CF-11?

Use CF-11 for narrow access, smaller teeth, conservative cervical reduction, longer axial walls and lighter chamfer preparation.

When should I use CF-26?

Use CF-26 for larger posterior teeth, broader axial surfaces and preparations requiring a wider or more substantial chamfer profile.

Which size is better for anterior teeth?

CF-11 is generally the more controllable choice for smaller anterior teeth and conservative preparations, subject to the individual tooth and restorative plan.

Which size is better for molars?

CF-26 is generally better suited to broad posterior surfaces when a substantial chamfer is required. CF-11 may still be preferable in narrow or difficult-access areas.

How many burs are included?

Each pack contains five identical burs of the selected code.

Is this a mixed pack of CF-11 and CF-26?

No. Select one variant, and the pack contains five burs of that selected code.

What grit are these chamfer burs?

The CF code identifies the bur profile, not necessarily its grit. Confirm the abrasive grade from the colour band, packaging or supplied specification before use.

Can a chamfer bur be used for zirconia crown preparation?

A chamfer or deep-chamfer margin may be used for selected zirconia restorations, but the required design and reduction must follow the restorative system, laboratory requirements and clinician’s judgement.

Can these burs be sterilised and reused?

Follow the cleaning, disinfection, sterilisation, reuse and replacement instructions supplied with the product. Do not assume a cycle or reuse limit that is not stated in those instructions.

Related Gold Cura Dental Burs

• Dental Burs & Bur Kits
• Taper Round Diamond Burs FG
• Tapered Fissure Diamond Burs FG
• Taper Conical Diamond Burs FG
• Fine Diamond Burs FG
• Green Coarse-Cutting Diamond Burs FG

Professional-use dental instrument. Confirm the selected profile, grit, handpiece compatibility, restorative indication and supplied processing instructions before clinical use.

Browse related products: Dental Diamond Burs.